Offer while stocks last
 PRODUCT DESCRIPTION
 Applicable in a single coat, and therefore without the need for flash-off between coats, the DP6000 primers can be sanded after just 1 hour. Roller application also saves time and product. To obtain the best results in terms of durability, it is recommended to apply an Epoxy Primer or a Wash Primer beforehand. The range of greys allows you to reproduce all the shades required to obtain maximum coverage of the matt base and with consequent savings in time and product. They can be directly repainted with DELTRON® UHS Progress and ENVIROBASE® High Performance
 SUPPORT PREPARATION
 Before each step, wash the substrate thoroughly. Rinse and dry before degreasing with a specific cleaner and make sure the substrate is clean and dry before proceeding with the next cycle step. Before application, the bare sheet metal must be sanded and completely free from rust. Apply epoxy primer or wash-primer on the exposed metal areas.
 Sanding
 Cataphoresis: P320-360
 Original finishes and primers: P280-P320
 GRP and fibreglass: P280.
 Polyester fillers: P80-P120-180